CANOGA PERKINS 9175 Command Reference - Manual (Page 308)

CanogaOS Command Reference
16-63
Command Mode
Privileged Exec mode and Exec mode
Examples
Switch# show ip bgp view I2 neighbors
BGP neighbor is 10.10.10.52, remote AS 10, local AS 10, internal link
BGP version 4, remote router ID 10.10.10.52
BGP state = Established, up for 00:03:22
Last read 00:00:13, hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
Route refresh: advertised
Address family IPv4 Unicast: advertised
Received 8 messages, 0 notifications, 0 in queue
Sent 8 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
Community attribute sent to this neighbor (both)
5 accepted prefixes
0 announced prefixes
Connections established 1; dropped 0
Local host: 10.10.10.50, Local port: 179
Foreign host: 10.10.10.52, Foreign port: 36950
Nexthop: 10.10.10.50
Nexthop global: fe80::280:c8ff:feb9:d268
Nexthop local: ::
BGP connection: non shared network
Read thread: on Write thread: off
Related Commands
show ip bgp neighbors
16.97 show ip bgp view summary
Use this command to view the summary data of neighbors of the given instance.
Command Syntax
show ip bgp view WORD summary
show ip bgp view WORD ipv4 (unicast|multicast) summary
WORD the name of the instance to display data for.
unicast Specifies unicast prefixes.
multicast Specifies multicast prefixes.