CANOGA PERKINS 9175 Command Reference - Manual (Page 277)

CanogaOS Command Reference
16-32
neighbor peer-group and neighbor remote-as commands. When this parameter is used
with a command, the command applies on all peers in the specified group.
orf Advertises ORF capability to its neighbors
Both Indicates that the local router can send ORF entries to its peer as well as receive ORF entries from
its peer.
Receive Indicates that the local router is willing to receive ORF entries from its peer
Send Indicates that the local router is willing to send ORF entries to its peer
Command Mode
Router mode and Address Family mode
Usage
Outbound Route Filters (ORFs) send and receive capabilities to lessen the number of updates exchanged
between neighbors. By filtering updates, this option minimizes generating and processing of updates.
The local router advertises the ORF capability in send mode and the remote router receives the ORF
capability in receive mode applying the filter as outbound policy. The two routers exchange updates to
maintain the ORF for each
16.49 neighbor capability route-refresh
Use this command to advertise route-refresh capability to the specified neighbors.
Use the no parameter with this command to disable this function
Command Syntax
(no) neighbor NEIGHBORID capability route-refresh
NEIGHBORID = A.B.C.D|X:X::X:X|TAG
A.B.C.D Specifies the address of the BGP neighbor in IPv4 format.
X:X::X:X Specifies the address of the BGP neighbor in IPv6 format.
TAG Name of an existing peer-group. For information on how to create peer groups, refer to the
neighbor peer-group and neighbor remote-as commands.
When this parameter is used with a command, the command applies on all peers in the specified group.
Command Mode
Router mode
Usage
Use this command to advertise to peer about route refresh capability support. If route refresh capability is
supported, then router can dynamically request that the peer readvertises its Adj-RIB-Out.
Examples
Switch# configure terminal
Switch(config)# router bgp 10
Switch(config-router)# neighbor 10.10.10.1 capability route-refresh