CANOGA PERKINS 9175 Command Reference - Manual (Page 428)

CanogaOS Command Reference
25-16
Switch (config-if)# disable-ldp
Related Commands
25.17 disnable-ldp
Use this command to enable LDP on a specified interface.
Command Syntax
enable-ldp
Syntax Description
This command has no arguments or keywords.
Command Mode
Interface mode
Defaults
This command has no default settings.
Examples
In the following example, the enable-ldp command is used to enable LDP on
a specified interface:
Switch # configure terminal
Switch (config)# interface eth0
Switch (config-if)# enable-ldp
Related Commands
25.18 explicit-null
Use this command to configure the router to send explicit-null labels for directly
connected FECs instead of implicit-null labels. Implicit-nulls are the default
labels
Note:
Do not use this command if the LDP is currently being used for