CANOGA PERKINS 9175 Command Reference - Manual (Page 737)

CanogaOS Command Reference
40-66
Command Syntax
show mac address-table [dynamic | static | multicast] [address mac-addr | interface interface-id |
vlan vlan-id]
dynamic Display the dynamic MAC address.
static Display the static MAC address.
multicast Display the multicast MAC address.
mac-addr Display the specified MAC address.
interface-id Display all MAC addresses on the specified physical port or link
aggregation port.
vlan-id Display all MAC addresses for the specified VLAN. The range is 1 to 4094.
Command Mode
Privileged EXEC
Usage
Examples
This is an example of output from the show mac address-table command:
Switch# show mac address-table
vlan port mac fwd static security
1 eth-0-1 0000.000a.000a 1 0 0
1 eth-0-1 ffff.000a.000a 1 1 0
Related Commands
mac-address-table
40.91 show mac address-table count
Use the show mac address-table count privileged EXEC command to display the number of
addresses present in all VLANs.
Command Syntax
show mac address-table count
Command Mode
Privileged EXEC
Usage
Examples
This is an example of output from the show mac address-table count command:
Switch# show mac address-table count