CANOGA PERKINS 9175 Command Reference - Manual (Page 664)

CanogaOS Command Reference
39-11
copy startup-config {destination-name | ftp://address/destination-name |
tftp://address/destination-name}
destination-name Save starup configuration to a specified file.
ftp://address/ Save startup configuration to a specified ftp server.
tftp://address/ Save startup configuration to a specified tftp server.
Command Mode
Privileged EXEC
Usage
The exact format of the source and destination URLs varies according to the file or directory location.
You may enter a particular file or a filename that follows the standard file system syntax
(filesystem:[/filepath][/filename]).
Examples
The following shows an example to save startup configuration to a specified file:
Switch# copy startup-config flash:/config.cfg
Related Commands
copy
copy running-config
39.16 show running-config
To display the contents of the currently running configuration file or the configuration for a specific class
map, interface, map class, policy map, or routing protocols, use the show running-config command in
all mode.
Command Syntax
show running-config [options]
access-list Displays ACL information.
as-path access-list Displays autonomous system path ACL.
class-map Displays class map information.
community-list Displays community list information.
full Displays the entire contents.
interface [IFNAME] Displays the interfaces information.
ip igmp snooping Displays IP IGMP snooping information.
ip mroute-rpf Displays multicast routes information.
ip multicast Displays multicast information.
ip pim sparse-mode Displays PIM sparse mode information.
ip route Displays IPv4 routes information.
ipv6 access-list Displays IPv6 ACL information.
ipv6 prefix-list Displays IPv6 prefix list information.
ipv6 route Displays IPv6 routes information.