CANOGA PERKINS 9175 Command Reference - Manual (Page 362)

CanogaOS Command Reference
20-2
20.2 show ip vrf
To show the set of defined VRFs and assocaited interfaces, use the show ip vrf command in EXEC mode.
Command Syntax
show ip vrf (VRF-NAME|)
VRF-NAME: VPN Routing/Forwarding instance name
Command Mode
Privileged EXEC mode
Usage
This example shows how to use this command to display current vrf information.
Switch#show ip vrf
VRF ComA, FIB ID 1
Router ID is not set
Interfaces:
!
VRF ComA; (id=1); RIP is not enabled
Name Interfaces
ComA
Name Default RD Interfaces
ComA
Examples
Switch#show ip vrf
Related Commands
20.3 ip vrf forwarding VRF-NAME
To associate a VPN routing and forwarding(VRF)instance with an Layer3 interface, use the ip vrf forwarding
command in interface configuration mode. To disassociate a VRF, use the no form of this command.
Command Syntax
ip vrf forwarding VRF-NAME
no ip vrf forwarding VRF-NAME
VRF-NAME: VPN Routing/Forwarding instance name
Command Mode
Interface configuration mode