CANOGA PERKINS 9175 Command Reference - Manual (Page 640)

CanogaOS Command Reference
37-3
specific port.
Examples
The following is sample output from the dot1x port-control command:
Switch(config-if)# dot1x port-control auto
Related Commands
show dot1x
37.4 dot1x protocol-version
Use the dot1x max-reauth-req interface configuration command on the switch to set the version of
EAPOL packets. Use the no form of this command to return to the default setting.
Command Syntax
dot1x protocol-version version
no dot1x protocol-version
version The EAPOL version. Default is 2.
Default
The default is version 2.
Command Mode
Interface configuration
Usage
You must specify the control of the authorization state of the port by the dot1x port-control command,
before setting the EAPOL version.
Examples
The following is sample output from the dot1x protocol-version command:
Switch(config-if)# dot1x protocol-version 1
Related Commands
show dot1x
37.5 dot1x quiet-period
Use the dot1x quiet-period interface configuration command on the switch to set the quiet time interval.
Use the no form of this command to return to the default setting.
Command Syntax