CANOGA PERKINS 9175 Command Reference - Manual (Page 167)

CanogaOS Command Reference
10-10
Command Syntax
ethernet cfm mip fdb hold-time <60-65535>
Command Mode
Configure mode
Default
The default is 60 minutes. The value in the range 60 to 65535 minutes.
Usage
This command is used to configure the mip ccm fdb hold time
Examples
Switch#configure terminal
Switch(config)# ethernet cfm mip ccm-database hold-time 1000
Related Commands
10.15 Enable cross-checking remote Maintenance End Point
Use this command to enable cross-checking between the list of configured remote maintenance end points
(MEPs) of a domain and MEPs learned through continuity check messages (CCMs).
Command Syntax
ethernet cfm mep crosscheck enable level 7 vlan VLAN_LIST
ethernet cfm mep crosscheck enable vlan VLAN_LIST
ethernet cfm mep crosscheck disable level 7 vlan VLAN_LIST
ethernet cfm mep crosscheck disable vlan VLAN_LIST
Command Mode
Privileged Exec mode
Default
None
Usage
This command is used to enable cross-checking remote MEP.