CANOGA PERKINS 9175 Command Reference - Manual (Page 61)

CanogaOS Command Reference
4-17
agg1(SU) Static eth-0-1(B) eth-0-1(D) eth-0-2(D)
agg10(SD) LACP eth-0-6(D) eth-0-7(D) eth-0-8(D) eth-0-9(D)
eth-0-10(D)
Related Commands
None
4.24 clear port-security address-table static
Use this command to clear static port-security mac address table.
Command Syntax
clear port-security address-table static [address address |interface interface |vlan vlan]
address: clear port-security entries specified mac address
interface: clear port-security entries specified interface name
vlan: clear port-security entries specified vlan id
Command Mode
Privileged Exec mode
Usage
None
Examples
This example shows how to clear static port-security mac address-table.
Switch# clear port-security address-table static
This example shows how to clear static port-security mac address-table on eth-0-1.
Switch# clear port-security address-table dynamic interface eth-0-1
Related Commands
show mac address-table
4.25 switchport port-security
To enable port security on an interface, use the switchport port-security command. To disable port
security, use the no form of this command.
Command Syntax
switchport port-security
no switchport port-security
Command Mode
Interface configuration