Leica Geosystems Leica mojoRTK - Manual (Page 103)

Leica mojoRTK, Normal System Operation 103
6.13 Glide

This is an optional software upgrade to the base model in all regions.
Description • Glide allows the operator to continue working for a period of time after the loss
of signal being received from the base station.
• The mojoRTK must be receiving GPS data for Glide to be enabled.
• Following the restoration of signals from the base station the mojoRTK console
will correct for offset if the offset error is less than the limit set for Maximum
Drift.
• Glide is primarily a fallback mechanism and accuracy to the line will degrade over
time.
Benefits Using Glide allows the mojoRTK to continue to guide the vehicle for up to ten minutes
after the base station signal has been lost. The loss of signal may be due to terrain,
vegetation, or interference.
Limitations • Glide can not be initiated until a GPS fix has been obtained on both the mojoRTK
and the base station.
• Glide will cease to operate if the mojoRTK looses GPS fix.
• Glide, when activated, will initiate 30 seconds after a loss of signal from the base
station.