Leica Geosystems Leica mojoRTK - Manual (Page 104)

104 Leica mojoRTK, Normal System Operation
• Glide operation is limited to a maximum of ten minutes without receiving correc-
tions from the base station. The mojoRTK console must receive at least 15
seconds of continuous reference corrections for the ten minute interval to reset.
• If the position drift upon signal restoration is greater than the Maximum Drift set,
guidance will be disabled and an error screen will be displayed on the mojoRTK
console.
Required items • Unlock code to unlock the Glide feature on the mojoRTK base station and
console.
• Service Pack 4 or later software
• Updated ME3 firmware (v3.610 or later)
Please contact Leica Geosystems or your local reseller for further details on activating
this optional software module.
Unlock codes For information about installing the unlock codes refer to "B.1 Unlock Codes".
Glide Under Glide the vehicle may drift left or right. Over time this drift may become signif-
icant. The default maximum drift limit is 0.1m.
The user has the option to set a maximum drift value for Glide.
Navigate to Menu -> Settings -> Guidance -> Max. Drift. The maximum allowable
value is 10.00m.