Leica Geosystems Leica mojoRTK - Manual (Page 79)

Leica mojoRTK, Tuning 79
5.4 Overshoot
Setting the over-
shoot The overshoot value will control the rate at which the tractor will drive at the line and
the rate that the tractor will round off as it approaches the line. A low value will cause
the tractor to hold off the line longer while a high value will cause the tractor to
converge quickly and possibly drive past the line.
1. Use the main dial to adjust the Overshoot, and
press to save the setting.
S_mojoRTK_022
Overshoot
120
0cm