5 completion of initial setup wizard, Completion of initial setup wizard – Leica Geosystems Leica mojoRTK User Manual
Page 73
Advertising
Leica mojoRTK, Running the mojoRTK Console for the First Time
73
4.5
Completion of Initial Setup Wizard
Setup Wizard
completion, step-
by-step
1. At this point, the display will say Setup Complete, setup has completed. Press
to restart the device.
2. Press
to restart the console.
3. As the system shuts down, it will program some of the configurations into the
unit. Please be patient and do not disconnect power during this stage.
4. The system will shut itself down and restart itself. If for any reason it doesn’t
start back up by itself, turn it back on with
.
You may be asked to perform an additional tuning operation for steering; this varies
from kit to kit. Refer to www.mojoRTK.com for your specific steering kit tuning.
Advertising