5 backing up the current console software, Backing up the current console software – Leica Geosystems Leica mojoRTK User Manual
Page 136
![background image](/manuals/651866/136/background.png)
136
Leica mojoRTK, Service
8.5
Backing up the Current Console Software
General informa-
tion
Once you have installed new software onto the console via Virtual Wrench
TM
, you can
back the software up to an USB key. This enables you to keep a copy of the new soft-
ware, which can also be used to upgrade the mojoRTK base station. For information
about software upgrade to the base station refer to "3.2.11 Selecting Data Format
(if available)". Refer to "B.3 Formatting USB Flash Drives" for important information
about using USB drives with the mojoRTK products.
Back up the
console software,
step-by-step
1. From the navigation screen, press
to enter main menu.
2. Turn the main dial to select Service, and press
.
3. Use the main dial to select Software, and press
.
4. Use the main dial to select Backup to USB, and press
.
5. The console will then save a copy of the currently installed software to the USB
key.