Leica Geosystems Leica mojoRTK - Manual (Page 88)

88 Leica mojoRTK, Normal System Operation
6.4 Setting the Implement Offset
General informa-
tion The implement offset is used when the center of the implement is not in line with
the center of the vehicle. It is used to adjust the vehicle paths for offset implements.
Setting implement
offset, step-by-
step
1. From the main steering screen, press to enter the main menu.
2. Turn the main dial to select Settings, and then press .
3. Use the main dial to select Guidance, and then press .
4. Use the main dial to select Implement Offset. The current offset is shown on
the right side of the screen. Press to change the implement offset.
5. Use or the main dial to set a new
implement offset.
S_mojoRTK_029
Implement Offset
Right
10 .00m