Leica Geosystems Leica mojoRTK - Manual (Page 112)

112 Leica mojoRTK, Normal System Operation
Recalling a wayline, step-by-step
5. Once you have chosen to save the wayline you will have the option to select
which slot (1 through 100) to save the wayline to.
6. Use the main dial to select a slot. Free slots are clearly indicated.
7. Once you have selected a slot press to save it.
1. Switch on the mojoRTK console and wait for a good position fix to be achieved
(red light will turn on).
2. If you are not on the navigation screen then press until it comes up.
3. Press twice to enter the Wayline wizard.
4. Press once to enter the Recall Wayline screen.

A wayline cannot be recalled if auto-steer is currently engaged. You will be
required to disengage first.
5. If there are waylines stored for your current base position you will have the
option to select which wayline to use.