Leica Geosystems Leica mojoRTK - Manual (Page 120)

120 Leica mojoRTK, Normal System Operation
• The mojoRTK console supports different baud rates but the baud rate selected
may limit how many sentences can be output and the rate at which they are
output. For example, at low baud rates it is not possible to output all sentences
at 10 Hz. The mojoRTK console will detect this situation, display an error, and
disable NMEA output. If you receive this error then switch to a higher baud rate
or reduce the number and/or rate of sentences to be output.
Required items • NMEA Cable (part number 675559)
• If high position accuracy is required then the following unlock codes will be
needed:
• NMEA Terrain Compensated and/or
• NMEA Accurate Height
Please contact Leica Geosystems or your local reseller for further details on activating
this optional software module.
Configuration For information about installing the unlock codes refer to "B.1 Unlock Codes".

If the NMEA Accurate Height unlock code is installed then it will be enabled
until the code expires. There is no option to turn off NMEA Accurate Height.