Leica Geosystems Leica mojoRTK - Manual (Page 85)

Leica mojoRTK, Normal System Operation 85
6.2 Setting Waypoints (or A-B Points)
General informa-
tion The waypoints are used to define a line in the field that all working lines will be
parallel to. Waypoints need to be set before auto-steer can be used.

Before you can set waypoints, the system must have a good position fix. If
auto-steer is not engaged and the system has a good position fix, the
Auto-steer Ready LED will be lit.
Setting waypoints,
step-by-step
1. Position your vehicle in the field where you want to start (Waypoint A).
2. Press twice to enter the setup for
Waypoint A. Press to set Waypoint A or
press to cancel.
3. Drive to your desired ending point in the field (Waypoint B).
S_mojoRTK_024
Press
[OK] to set
point A