6 normal system operation, 1 starting up the system, Normal system operation – Leica Geosystems Leica mojoRTK User Manual
Page 84: Starting up the system, 6normal system operation
Advertising
84
Leica mojoRTK, Normal System Operation
6
Normal System Operation
6.1
Starting up the System
Start up, step-by-
step
1. Start the base station in an open area and within line of sight of the console.
Refer to "3.1 Base Station Setup" for more information.
2. Press and hold
for 2-3 seconds to start the mojoRTK console in the vehicle.
Wait about one minute for the system to start.
3. The mojoRTK controller will be ready for use when the Auto-steer Off / Ready
LED turns red.
The Auto-steer Off / Ready LED is the main way to know if the system is ready to
steer.
Advertising