12 .00m, 3 setting the line spacing – Leica Geosystems Leica mojoRTK User Manual
Page 87
Advertising
Leica mojoRTK, Normal System Operation
87
6.3
Setting the Line Spacing
General informa-
tion
The line spacing sets how far apart the working lines are. This distance is essentially
the width of the implement you are using.
Setting line
spacing, step-by-
step
1. From the main navigation screen, press
to enter the main menu and select
Line Spacing by pressing
.
2. If measurement is correct as it is, press
.
3. Use
or the main dial to set the line
spacing according to the measured implement
width - from end tool to end tool.
Once you have set the whole units to the desired
value press
, this will then allow you to
change the fractional units (after the decimal
point).
4. Press
to confirm the new setting.
S_mojoRTK_027
Line Spacing
12
.00m
Advertising