7 rollback software, Rollback software – Leica Geosystems Leica mojoRTK User Manual
Page 55
Leica mojoRTK, mojoRTK Base Station Operation
55
3.2.7
Rollback Software
Rollback software,
step-by-step
When performing a software rollback, ensure that the batteries are
charged and the base station is connected to external power. It is vitally
important that the device is not turned off during rollback.
1. Using ,
scroll
to
Service and press
.
2. Using ,
scroll
to
Rollback Software and press
.
3. Using ,
select
Yes or No to select the software version and press
to
select.
Rollback software consists of a number of steps that will be displayed on
the console, including Rebooting, Power Down, and Loading. This will take
approximately one minute.
Rollback software is only available when an earlier version of software was previously
installed on the base station.