Leica Geosystems Leica mojoRTK - Manual (Page 115)

Leica mojoRTK, Normal System Operation 115
Base position
storage - base
station Clearing stored base station positions, step-by-step
5. Use the mail dial to scroll down to Load Waylines, and then press .
6. You will be prompted to confirm that you wish to load the waylines. Loading a
new set of waylines will erase all current waylines.
7. If you wish to cancel then press .
If you wish to proceed with loading the waylines then select Yes by using the
main dial, and then press .
8. A message will then be displayed indicating if the load was successful. Press
to close the message.
The loaded waylines may now be used.
1. Switch on the mojoRTK base station.
2. Use to select Settings, and then press .
3. Use to select Saved Positions, and then press .
4. Use to select Delete Stored, and then press .