Leica Geosystems Leica mojoRTK - Manual (Page 24)

24 Leica mojoRTK, System Installation
2 System Installation
2.1 Before Installation
General installa-
tion information

Installation does not require specialist knowledge. The installer is assumed
to be familiar with the required knowledge by reading and studying the
present user manual including the safety directions. The installer must be
able to use the system in accordance with the user manual. However, Leica
Geosystems recommends that installation of the mojoRTK equipment be
performed by a qualified technician because installation requires making
electrical connections.
• The following instructions are to be used as a general guide during the installa-
tion of the mojoRTK. For more specific instructions, please visit
www.mojoRTK.com to view additional platform information and recommended
vehicle settings.
• Understand that the system will not operate at peak performance if steering
joints and linkage assemblies are not within the manufacturer’s specifications.
Check for worn steering components by turning the steering wheel. As the
steering wheel is turned, the wheels should begin to move. If results are unde-
sirable, please consult your vehicle manufacturer’s maintenance manual.
• Install the system in a clean and dry shop environment. Failure to do so may
cause the system to short or promote product malfunction. Any moisture on