D) receive mode button and indicators, Ogm play button, Ogm rec button – Panasonic KX-F195 User Manual
Page 13: Rew (rewind) button, Ff (fast forward) button, Memo/2 way button, Playback/pause button, Tone button, Flash button, Redial button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
d) RECEIVE MODE Button and Indicators:
Used to select the desired receiving mode.
The indicators light to show the mode in which the unit is set.
®OGM PLAY Button:
Used to replay your outgoing message.
©OGM REC Button:
Used to record your outgoing message.
®ICM ERASE Button:
Used to erase recorded incoming messages at high speed.
@ REW (REWIND) Button:
Used to run the tape quickly backward to a desired point.
@
FF (FAST FORWARD) Button:
Used to run the tape quickly forward to a desired point.
©MEMO/2 WAY Button:
Used to start and stop recording of a memo message or a telephone conversation.
@ PLAYBACK/PAUSE Button:
Used to play back recorded messages, or interrupt playback or FF/REW operation.
©TONE Button:
Used to change the dialing mode from pulse to tone during a dialing operation.
© FLASH Button:
Used to access some features of your host PBX.
© REDIAL Button:
Used to redial the last dialed number.
@ MONITOR (VOICE STDBY) Button and Indicator:
Used for on-hook dialing and voice contact features. The indicator lights when these functions
are on.
©PAUSE Button:
Used to insert a pause into a phone number during programming.
©AUTO Button:
Used for speed dialing.
©SET Button:
Used to store parameters during programming.
© PROGRAM Button:
Used to start or end programming functions.
© Direct Call Station Keys:
Used for one touch dialing
©STOP/CLEAR Button:
Used to cancel transmission or copying operation. Also used during programming to clear the
previously entered parameters.
©START/COPY Button and Indicator:
Used to start transmission and copy functions. The indicator lights when these functions are on.
1—6