Polling another unit, Using one touch dialing, Using speed dialing – Panasonic KX-F195 User Manual
Page 62: Note, Polling another unit -5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Polling another unit
The following procedure lets you poll another station.
Make sure that no documents have been fed into the unit.
1
2
Press the POLLING button.
The POLLING indicator flashes.
Enter the phone number you wish to poll while the
POLLING indicator is flashing.
Using one touch dialing;
Press the desired direct call station key.
The unit will dial and receive documents.
When reception ends, the POLLING indicator goes
out.
OR
Using speed dialing;
Press the AUTO button, then press the desired
station number (“00” through “49") using the dial
keypad.
The unit will dial and receive documents.
When reception ends, the POLLING indicator goes
out.
OR
Using manual dialing;
Dial the desired phone number, then press the
START/COPY button.
The unit will start receiving documents.
When reception ends, the POLLING indicator goes
out.
Note:
•If the polled station is busy or there is no answer, the unit automatically redials up to 6 times within
10 minutes.
•If you want to cancel polling before reception, press the POLLING button again or press the
STOP/CLEAR button. The POLLING indicator will go out.
3-5