0 erasing recorded voice-messages, 0 lcd (liquid crystal display), D playing back recorded voice-messages – Panasonic KX-F195 User Manual
Page 50: Stopping the tape (pause mode), D recording a memo message, 0 forwarding the tape quickly, D rewinding (resetting) the tape quickly, Operating as an answering device
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating as an answering device
The unit also works as an automatic telephone answering and recording system. The following
functions are available as an answering device.
0 Erasing recorded voice-messages:
After reviewing your messages, press the ICM
ERASE button. The messages are erased while
the tape is rewound.
The tape can be erased at high speed even if
the record-prevention (knock-out) tabs have
been removed.
CD
Recording your OGM:
See page 1-15.
CD Verifying your OGM:
See page 1-16.
0
LCD (Liquid Crystal Display)
The number of recorded voice-messages are
shown on the display and the TAD/FAX
indicator flashes.
If the power supply has been interrupted the
display shows “-
(D
Playing back recorded voice-messages:
Press the PLAYBACK/PAUSE button.
Stopping the tape (Pause mode):
Press the PLAYBACK/PAUSE button during
playback mode. The tape pauses until you
restart it by pressing the PLAYBACK/PAUSE
button. The unit does not answer calls
automatically while in the pause mode.
(D
Recording a memo message:
See page 2-16.
Recording a 2-way conversation:
See page 2-17.
0 Forwarding the tape quickly:
Press the FF (Fast Forward) button.
(D
Rewinding (Resetting) the tape quickly:
Press the REW (Rewind) button.
2-13