Resetting the tape for future messages, If you have used memory playback, If you have reset the tape by mistake – Panasonic KX-F195 User Manual
Page 73: Room monitor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the tape for future messages
After listening to the recorded messages, you can reset the tape and record future messages from
the beginning of the tape.
After all the messages have been played back or even while they are being played;
Press “3”, then hang up.
If you have used Memory Playback;
1
2
If you have reset the tape by mistake;
The unit rewinds the tape to the beginning. Future
messages will be recorded and the previously
recorded messages are lost.
Press “3".
The unit rewinds the tape to the beginning of the
newly recorded messages, then beeps.
Press “3” again after hearing the beep.
The unit rewinds the tape to the beginning of the
previousiy recorded messages.
Press “2” after the tape has been reset.
One beep sounds.
The unit advances the tape to the end of the
recorded messages.
Room monitor
You can monitor the sound in the room where the unit is installed for about 30 seconds.
Press “5” to monitor the room sounds after hearing
the beeps that indicate the number of recorded
messages.
You can hear the room sounds for 30 seconds
after one beep. If you wish to continue monitoring,
press “5" again within 10 seconds after hearing
one beep.