Panasonic KX-F195 - Manual (Page 69)

Operating as an answering device from a remote
phone
You can retrieve the incoming messages and re-record your outgoing message from a remote
location with a touch tone telephone.
The following features are available on this unit.
•Message playback
•Newly recorded message playback (Memory Playback)
•Back space and skip forward
•Recording a marker message
•Resetting the tape for future messages
•Room monitor
•Re-recording the OGM (outgoing message)
•Skipping the OGM for ICM (incoming message) recording
These operations are available only In TAD/FAX mode, if your unit is in the TEL mode, call your unit
and wait for 15 rings. The unit will switch to the TAD/FAX mode.
Toll saver
When you call the unit from a remote location, the number of rings tells you if there are any new
voice-messages.
if the unit answers on the 1st ring, there is at least one new message recorded.
If the unit answers on the 3rd ring, there are no new messages recorded.
Hang up immediately when you hear the 2nd ring. The 2nd ring indicates that there are no new
messages. This will save you the toll charge for the call.
The toll saver function works only when TAD/FAX RING COUNT is set to the Toll Saver position.
See page 5-4.
Summary of remote control functions
1
2
Call your unit.
an^)>
Skip OGM (page 3-17)
T
Enter your REMOTE TAD ID
during the OGM.
T
The unit will play back all recorded
messages.
ABC
2
Back Space (page 3-15)
Skip Forward (page 3-15)
t^^ll Resetting Tape (page 3-16)
Use the following functions as needed.
1
CHI
A Memory Playback (page 3-14)
jk T
5 Room Monitor (page 3-16)
PftS
7 \ OGM Re-recording (page 3-17)
(W5 y
1
Stop OGM Recording
Ì y 1
(page 3-17)
3-12