Note – Panasonic KX-F195 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Turning the TX passcode check on
1
Press the PROGRAM button.
The PROGRAM indicator lights and the display
shows "P-_".
2
Press then press “14" for TX PASSCODE
CHECK setting.
The display shows “P-F14 2",
Setting selections are;
1: ON (activate this function)
2: OFF (deactivate this function)
3
4
Press “1" to activate this function.
The display shows “P-Fl 4 1".
Press the SET button to store your selection in
memory.
The display shows “P-_".
5
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
Note:
•If the network passcode is set to “0000”, the unit does not check the passcode.
3-8
Advertising