Tx passcode check, Rx passcode check, Network communication – Panasonic KX-F195 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Network communication
The network communication function with network passcode can eliminate fax transmission to
unauthorized parties, and help to prevent reception from an unauthorized station.
This feature is effective to prevent “Junk mail’’ faxes since only those units with the same passcode
can transmit to your unit.
When the network communication function is used, the identical network passcode of 4 digits must
be programmed on both sides of the line. The unit checks the passcode before transmitting or
receiving a document.
The unit provides two types of passcode check modes. They are TX (transmission) passcode check
mode and RX (receiving) passcode check mode.
TX Passcode Check:
This function can be used when you wish to transmit a document only to authorized stations. If the
passcode sent from the other Panasonic compatible machines does not match with the one
programmed in your unit, transmission does not take place. (See page 3-8 for TX passcode check
setting.)
RX Passcode Check:
This function can be used when you wish to receive a document only from authorized stations. If the
passcode sent from the other Panasonic compatible machines does not match with the one
programmed in your unit, reception does not take place. (See page 3-9 for RX passcode check
setting.)
This feature is effective only between Panasonic compatible machines that have the same passcode.
Note:
•The password for the polling function is not related to this network communication. They are
independent functions.
3—6