Re-recording an outgoing message, Note, Skipping the ogm for icm recording – Panasonic KX-F195 User Manual
Page 74: Instructions for caller, Recording an outgoing message (ogm) -15, Skipping the ogm for icm recording -17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Re-recording an outgoing message
You can change the content of your OGM from a remote telephone.
1
2
3
Press ‘T’ to start re-recording after hearing the
beeps that indicate the number of recorded
messages.
After hearing a long beep, speak clearly and loudly
for up to 16 seconds.
When you finish, press "9".
The new OGM is played back to confirm the
change.
Note:
•If you pause for over 2 seconds while recording, the unit beeps and stops the OGM recording. In
this case, repeat from step 1 within 10 seconds.
Skipping the OGM for ICM recording
Callers can leave a message on your unit without listening to your OGM.
1
2
Instructions for caller:
Call your unit.
Press “0” while the OGM is playing.
After hearing a long beep, speak clearly and loudly
to leave your message.
3-17