Note – Panasonic KX-F195 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the network passcode
To activate this feature, the identical network passcode must be preprogrammed both on your unit
and the other Panasonic compatible machine{s). Follow the steps below.
1
Press the PROGRAM button.
The PROGRAM indicator lights and the display
shows “P-_”.
2
3
Press then press “12” for NETWORK
PASSCODE setting.
The display shows “P-F12 0000”.
Enter the desired passcode of 4 digits using the
dial keypad.
You can choose among numbers “0001" through
“9999” as the network passcode.
To correct an error, press the STOP/CLEAR button
then correct input.
4
Press the SET button to store the programming in
memory.
The display shows “P-_”.
5
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
Note:
•The network passcode is set to "0000” as the default.
3-7