Programming the privacy ring id, Chi 7ipr?| f mmo 0, Note – Panasonic KX-F195 User Manual
Page 67: Programming the privacy ring id -10, Call with privacy ring, R 1 i 2j el
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Call with privacy ring
This feature eliminates interruptions caused by unwanted calls. Only callers with a passcode can
activate a distinctive tone during the playing of your OGM to notify you of a priority call.
Entering a unique 3-digit code is required to activate this feature. Issue your code to those callers
with priority status. All other calls will be routed to the answering system, unless you pick up the
handset.
The unit provides PRIVACY RING ID “333" as default setting. If you want to change the default
setting, follow the steps below.
Programming the PRIVACY RING ID
1
2
3
4
5
r 1 I 2J El
[
CHI
7ipr?| f
MMO 0
I'"* 7 I 1-^ 8]
IOPIB 0 I
Press the PROGRAM button.
The PROGRAM indicator lights and the display
shows “P-_".
Press “#”, then press “08" for PRIVACY RING ID
setting.
The display shows “P-F08 333”.
Enter the desired 3-digit number as new PRIVACY
RING ID using the dial keypad.
To correct an error, press the STOP/CLEAR button
then correct input.
Press the SET button to store the programming in
memory.
The display shows “P-_”.
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
Note:
•You should not use codes which contain zero (0) since this causes the unit to skip the OGM. (For
example, 200, 502, etc.)
•We recommend that you do not use seven (7) as a code number, since this number is used as the
OGM rerecording command for remote operations.
3-10