Panasonic KX-F195 - Manual (Page 70)

Programming a REMOTE TAD ID number for remote operation
The REMOTE TAD ID number prevents unauthorized persons from accessing your unit and
listening to your messages. The REMOTE TAD ID is preset to 111. If you wish to change the
number, you can choose any number from “111 ” to “999” except numbers including “0”.
For proper operation, make sure that the REMOTE TAD ID number is different from your PRIVACY
RING ID number.
1
2
3
4
5
1 2 3
T] I ^*1- 5 I I
I '■"s 7 I ! 8 I i i
0 j
Press the PROGRAM button.
The PROGRAM indicator lights and the display
shows “P-_”.
Press then press “06" for REMOTE TAD ID
setting.
The display shows “P-F06 111".
Enter the desired REMOTE TAD ID using the dial
keypad.
To correct an error, press the STOP/CLEAR button
then correct input.
Press the SET button to store the programming in
memory.
The display shows “P-_”.
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
Note:
•You should not use codes which contain zero (0) since this causes the unit to skip the OGM. (For
example. 200, 502 etc.)
•We recommend that you do not use seven (7) as a code number, since this number is used as the
OGM rerecording command for remote operations.
3-13