Benutzen der anti-bodenaufnahme- funktion, Using the anti-ground recording function – Panasonic NVRX33EG User Manual

Page 70

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

APS

3CHKE

' *T TT T T^

DEUTSCH

ENGLISH

Benutzen der Anti-Bodenaufnahme-
Funktion

Diese Funktion verhindert versehentliches Aufnehmen
des Straßenbelags, Ihrer Füße usw. Sie wird nur dann
ausgelöst, wenn der Camerarecorder im Aufnahme-
Modus ist und Sie eine der folgenden Tätigkeiten
ausführen:
•Wenn Sie den Camerarecorder schnell nach unten

schwenken. (Wenn Sie ihn langsam nach unten
schwenken, z.B: für einen vertikalen Schwenk beim
Aufnehmen 0> wird sie nicht ausgelöst.)

•Wenn Sie den Camerarecorder aus der normalen

horizontalen Aufnahmesteliung langsam (um mehr als
70° o und für mehr als ein paar Sekunden) nach
unten schwenken und den Camerarecorder beim
Gehen vor- und rückwärts schwingen.

Beim Auslösen dieser Funktion schaltet der
Camerarecorder automatisch auf den Aufnahmepause-
Modus um, der Sucher schaltet sich aus, und die
Anzeigelampe [VCR] blinkt.

■ Erneutes Auf nehmen

•Wenn Sie den Camerarecorder wieder in ungefähr

horizontale Position © anheben, schaltet er wieder
auf den Aufnahmepause-Modus um. Zum Aufnehmen
der nächsten Szene die Aufnahme-Start-ZStop-Taste

drücken.

• Da die Aufnahme u.U. einige Sekunden lang gelaufen

ist, blinkt die Anzeige [CHK] im Sucher, um darauf
hinzuweisen. Um diesen kurzen unerwünschten
Aufnahmeteil zu iöschen und die nächste Szene
störungsfrei an das Ende der zuletzt absichtlich
aufgenommenen Szene anzufügen, das Band mit Hilfe
der Kamerasuchlauf-Funktion (-» 50) kurz
zurückspulen, um das Ende der letzten absichtlich
gemachten Aufnahme aufzufinden. Anschließend mit

dem Aufnehmen der nächsten Szene beginnen.

■ Ausschalten der Anti-Bodenaufnahme-

Funktion

[APS] im Hauptmenü [MAIN MENU] auf [OFF] einstellen,
so daß die Anzeige [APS] im Sucher verschwindet.
Dadurch wird auch die automatische Stromspar-Funktion
(-> 68) ausgeschaltet.

Using the Anti-Ground Recording
Function

This function prevents unintentional recording of the

ground, your feet, etc. It becomes activated only when
the Movie Camera is in the Recording Mode and you do
one of the following:
•You tilt the Movie Camera quickly downward. (When

you tilt the Movie Camera slowly downward for vertical
panning during recording 0, it does not become
activated.)

•You tilt the Movie Camera slowly downward (by more

than 70° 0 from the normal horizontal recording
position for more than a few seconds) and walk
swinging the Movie Camera back and forth.

When this function becomes activated, the Movie
Camera automatically switches over to the Recording

Pause Mode, the Finder turns off and the [VCR] Lamp

flashes.

■ Resuming Recording

•When you return the Movie Camera to a roughly

horizontal position © the Movie Camera is again in
the Recording Pause Mode. Press the Recording Start/
Stop Button to restart recording.

•As recording may have continued for a few seconds,

the [CHK] Indication flashes in the Finder. To erase this
short unwanted part of the recording and smoothly join
the next scene to the end of the iast intentionally

recorded scene, rewind the tape a little using the

Camera Search Function (-> 50) to locate the end of
the last intentionally recorded scene. Then start
recording the next scene.

■ Cancelling the Anti-Ground Recording

Function

Set [APS] on the Main Menu [MAIN MENU] to [OFF] so
that the [APS] Indication disappears in the Finder
This also cancels the Auto Power Save Function. (-» 68)

70

Advertising