Cannon Instrument CMRV-5000 - Manual (Page 30)

24
CANNON ® Mini-Rotary Viscometer CMRV-5000 Instruction & Operation Manual
Version 1.0b—August, 2011; CANNON ® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
Initial security setup
The VISCPRO ® software installation creates a security account for one
manager with a blank password. After VISCPRO ® installation, a pass-
word should be assigned for the manager using the Change Password
menu option from Main. Managers may add or change accounts for
technician status personnel.
Use the Log In feature to identify the CMRV operator and/or access
security functions.
NOTE Once an operator is logged in, that operator’s name is associated with
any sample data obtained during that VISCPRO session. The operator
name may be included in analyses.
Procedure 1. Click Log In from Main.
2. Select the desired name from the drop-down list box.
3. Type the desired password in the Password field for the individual
selected.
4. Click OK.
Use the Change Password feature to change the current user password.
Procedure 1. Log in to the VISCPRO ® software using the Log In command from
Main.
2. Select Change Password from the Main menu options.
3. Type in the new password in the Password field.
4. Retype the password in the Confirm Your New Password field.
5. Click OK to save the new password and close the Change Pass-
word window.
Use the Update User Information feature to update the security list of
authorized technicians and managers. User information can only be
updated by an individual logged in with a higher security clearance than
the user for which information is to be altered. Manager status is
necessary to change Technician information. Service status is neces-
sary to change Manager information. To obtain Service status, it is
necessary to select user CANNON Instrument Company from the Log
In window and to type in the current CANNON
® password. For the
current password (updated daily), call CANNON ® at (814) 353-8000.
Procedure 1. Click Log In from Main.
2. Select your Manager or Service level user name from the User
Name list box. Input the correct password in the appropriate field.
3. Click OK.