Cannon Instrument CMRV-5000 - Manual (Page 57)

51
CANNON ® Mini-Rotary Viscometer CMRV-5000 Instruction & Operation Manual
Version 1.0b—August, 2011; CANNON ® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
4. Click on the desired cell number (or select it from the drop-down
box).
5. Input the desired value(s) for the calibration(s) and the viscosity of
the calibration standard. Constant 1 represents the most current
calibrated value, and Constant 2 represents the value from the
previous cell calibration). The viscosity of the standard is indicated
on the bottle label.
NOTE If constants are edited with invalid information, data from samples tested
using the constant information will be compromised.
6. Click the Update Data button to transfer Constant and Viscosity
information to the Cell Constants list box.
7. Repeat steps 4-6 for other desired cells. Then click the Save button
to save the updated constant information to the current instrument
configuration and exit the View Cell Constants window.
NOTE If you do not click the SAVE button, updated data will not be saved.
Saving a configuration
Whenever you have altered an instrument configuration, you may wish
to save the resulting settings as a new or existing configuration. To save
current settings, use the Save Instrument option:
Procedure
1. From the VISCPRO ® primary menu options, select Main.
2. Click on Save Instrument. The Save Instrument window will appear.
3. Select an instrument to apply the current Instrument Configuration
settings to.
4. Type a name for the new configuration in the Save As: box. Or click
to select an existing configuration name from the configuration list
box.
5. Click OK to save the configuration. Or click Cancel to exit the
Save Instrument window without saving your changes.
Restoring instrument settings from a saved configuration
There are three options for restoring instrument settings from a saved
configuration. These restore options are individually selectable from the
View Instrument window.
NOTE The Restore Instrument Settings and Restore Tray Settings options are
only available if you are logged in as a manager.