Cannon Instrument CMRV-5000 - Manual (Page 80)

74
CANNON ® Mini-Rotary Viscometer CMRV-5000 Instruction & Operation Manual
Version 1.0b—August, 2011; CANNON ® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
show previous samples box if you do not wish to display samples
tested prior to the time the analysis is opened.
Use the spin controls to select the Sample Time Window (the desired
range of recent samples to be included in the analysis). Data from
samples tested within [x] hours will be displayed in the analysis. Note
that the analysis sorting options are disabled if you are using Dynamic
Update.
EXAMPLE If the Do not show previous samples box was unchecked and a Sample
Time Window value of 5 hours was selected, the analysis (when opened)
would display data for all samples tested within the last five hours.
Using the sample/error filter
Use the sample filter to limit the analysis to samples which have been
tested with certain instruments, profile names, by certain technicians, or
which have certain Sample ID characteristics. To filter samples using
these variables, click the Sample Filter tab from the analysis configura-
tion window.
NOTE For the error analysis, this tab is labelled Error Filter and the filter options
are limited to instrument and technician).
Then select the desired instruments and profile names from their respec-
tive list boxes. To select a range of profile names/instruments, click on
the first desired item and then hold down the S key while clicking
on the last desired item in the sequence. To individually select profile