Cannon Instrument CMRV-5000 - Manual (Page 93)

87
CANNON ® Mini-Rotary Viscometer CMRV-5000 Instruction & Operation Manual
Version 1.0b—August, 2011; CANNON ® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
CHAPTER
15
MRV DATA TABLE ANALYSIS
The MRV Data Table analysis is designed to permit convenient viewing
of data collected from samples which have been tested with the CMRV.
The sample analysis displays sample data in a tabular format. In addition
to Sample identification (ID), the following data may be included:

Sample ID—Sample identification information

Test Date—Date the sample was measured

Test Time—Time the sample was measured

Cell Num—Number of the test cell (1-9)

Profile Name—Name of cooling profile used for test

Prof Start Date—Date the profile began

Prof Start Time—Time the profile began

Temp Data File—The .ttd file associated with the sample test

Technician—Technician name (the individual logged in at the time
the test was completed)

Instrument Type—The instrument model identification

Instrument ID—The unique instrument identification information

Instrument S/N—The instrument model serial number

Yield Stress—Yield Stress test result

Y. S. Factor—Yield Stress factor for the profile

Total Yield Mass—Yield Stress total mass added during test

Test Temp—Temperature at which the sample was tested

Therm Reading—Reference thermometer value (input by user)

Viscosity—Viscosity of sample

Visc Time 1—Time elapsed during the viscosity test

Visc Rev 1—Number of rotor revolutions during the viscosity test

Cell Constant—Percentage difference between calculated and
known viscosities

Viscosity Mass—Mass used to test for viscosity
Reporting options The MRV Data Table analysis can present data for any or all samples
residing in the database. Several powerful filters may be used to create
useful reports. These filters may be used by making selections from the
tabbed property sheets found in the CMRV Analysis Configuration
window. Once the appropriate filters have been designated, the resulting
report configuration can be saved for future use.