Doepfer A-100(~ 40 MB) - Manual (Page 21)

doepfer System A - 100 5. Accessories
Subject to change without notice 15
Part Description
A-100BUS Separate system bus
One bus board with 14 connectors for connecting modules, 3 control LEDs (+12,-12,+5V)
A-100AD5 5V Low cost adapter
Additional power supply producing +5 V / 100 mA; can be connected to any free socket on the
system bus board. For modules which require 5V. This is an alternative to the NT5 +5 V po-
wer supply.
A-100NT5 Separate 5 V power supply (no longer in production)
+5 V / 500mA additional power supply, assembled and tested.
A-100NT12 Separate 12 V power supply (no longer in production)
+/-12 V 650mA additional power supply, assembled and tested.
A-100PSU2 Separate 12 V power supply
+/-12 V 1200mA additional power supply, assembled and tested.
A-100B...
Blanking panels / back panels
B1: 1 HP / B2: 2 HP / B4: 4 HP / B8: 8 HP / B42: 42 HP / B84: 84HP
A-100B84PV2
Back panel for power supply
Punched ready for power supply installation, comes with mains inlet, mains switch, fuse holder
and safety metal box for the PSU