Doepfer A-100(~ 40 MB) User Manual
Page 669
doepfer
System A - 100
MIDI-CV/SYNC interface
A-190
15
GLIDE TIME
The Glide Time parameter controls the length of the
portamento time in the A-190’s built-in glide / porta-
mento function, in steps of 20ms at a time.
M
M
M
M
PROG CHANGE n
n :
0
Glide Off
1 ... 127
Glide On,
GLIDE-TIME = n x 20 ms
Any channel can receive the message.
[m
m
m
m
Set the glide time (0 ... 127)
]
H
This parameter can also be controlled in real
time by means of the MIDI portamento con-
troller (Controller #5). See chapter 4.5,
PERFORMANCE mode.
H
This MIDI function is like a software version
of the A-170 Slew Limiter.
ASSIGN MODE
The ASSIGN MODE parameter controls note assign-
ment - that is, which note the VCO should produce
when more than one key is held down at once.
M
M
M
M
Last Note Priority:
PROG CHANGE 1
Highest Note Priority: PROG CHANGE 2
Any channel can receive the message.
[m
m
m
m
Select which type of note priority you want
]
Performance Menu 3
Glide
2
Performance Menu 4
Assign
2