Doepfer A-100(~ 40 MB) - Manual (Page 657)

doepfer System A - 100 MIDI-CV/SYNC Interface A-190
3
In / Outputs
! MIDI THRU : Output for relaying MIDI messages
sent to MIDI IN to another MIDI unit.
" MIDI IN : Input for MIDI messages.
§ Clock : MIDI clock signal (or divided version)
output.
$ Reset : Reset signal output:-
MIDI-Start or Continue): low voltage
MIDI-Stop: high voltage.
% GATE : GATE signal output; normally connec-
ted internally to the A-100 system bus
(INT.GATE line), but can be dis-
connected.
& CV 1 : Output for control voltage 1 (D/A
converter 1); normally connected in-
ternally to the A-100 system bus (INT.
CV line), but can be disconnected.
/ CV 2 : Output for control voltage 2 (D/A
converter 2).
H N.B.:
On the front panel of the first
production series , the arrows
were accidentally printed the
wrong way round.
In these instructions, though,
all the functions, for instance
selecting a menu group, are
described correctly (see p.
6).
Channel CV 1
Group
Perform. Config.
Ч Ш