Doepfer A-100(~ 40 MB) - Manual (Page 673)

doepfer System A - 100 MIDI-CV/SYNC interface A-190
19
CONTROLLER #68 (Legato)
The retrigger function (see CONFIG menu 1) can
also be switched on and off by this controller. Changes
made using this controller are only temporary: they are
not stored during the ‘save’ procedure, and on power-
up, the A-100 will revert to the default factory setting.
M M M M CONTROL ch 68 n
n : 0 to 63 Retrigger Off
64 to 127 Retrigger On
CONTROLLER #92 (Tremolo)
This controller can affect LFO frequency (see PER-
FORMANCE menu 2). Changes made using this con-
troller are only temporary: they are not stored during
the ‘save’ procedure, and on power-up, the A-100 will
revert to the default factory setting.
M M M M
CONTROL ch 92 n
n : 0 to 127 LFO frequency
CONTROLLER #121 (All Controllers Off)
If this MIDI message is sent to the A-190, LFO
amount will be set to 0 (although the LFO keeps
running at the same frequency) and portamento is
switched off.
M M M M
CONTROL ch 121 n
n : 1 to 127
CONTROLLER #123 (All Notes Off)
If this MIDI message is sent to the A-190, the gate is
turned off, and all notes still in the A-190’s memory
are cleared. Control voltages remain at the level at
which they were last set.
M M M M
CONTROL ch 123 n
n : 1 to 127