Doepfer A-100(~ 40 MB) - Manual (Page 8)

System A -100 doepfer
2
Fuse values for different mains voltages and power supplies
Type of A-100 case
Netz-
span-
nung
A-100G3, A-100G6
A-100P6, A-100P9
A-100PB, A-100LC6
A-100LC9, A-100LCB
(primary circuit fuse/
mains fuse)
A-100PMS6, A-
100PMS9,
A-100PMB
(primary circuit fuse/
mains fuse)
A-100PMS12, A-
100PMD12
(primary circuit fuse/
mains fuse)
A-100LC3
A-100DIY Kit#1
(secondary circuit fuse/
low voltage fuse)
115V 800 mA 1.6A 3.15A 2.5A
230V 400 mA 800 mA 1.6A 2.5A
All fuses have to be time lag / slow blow.
The fuse values are valid only for cases that include the power supply A-100PSU2 manufactured from about
the year 2000.
Older A-100 cases manufactured before 2000 may include a former version of the power supply (A-100NT12),
that outputs only 650mA. For these A-100 cases the fuse values mentioned above are not valid. Please look at
the fuse specification on the corresponding label outside the case if you want to run one of the old units.