Doepfer A-100(~ 40 MB) - Manual (Page 540)

A-161 Clock Sequencer System A - 100 doepfer
6
Creating complex envelopes
A small modification to the previous patch is shown in
Fig. 3. Here, the Clock Sequencer outputs are
connected to a series of Slew Limiters (A-170), to
create one very complex envelope.
The Clock Sequencer triggers the Slew Limiters in
sequence, and their various envelopes are mixed in a
linear mixer A-138a. The result is a complex envelope
which can be patched from the mixer output to
anywhere.
P You can elaborate on this patch further, by
adding other control voltages to the slew
limiters’ envelopes - for instance:
• an ADSR with a long envelope, triggered
by output ! on the A-161;
• an LFO output, with or without reset;
• the random output from an A-118;
• an audio signal via an envelope follower
(A-119).
Fig. 3: Creating complex envelopes
H If you use more than four modulation sour-
ces (Slew Limiter, ADSR, etc.), you’ll need
two mixers.
A-161
1
2
3
4
5
6
7
8
Clock
Sequencer
A-170
A-160
A-170
LFO, MIDI Clock
Input 1
Output
A-138 a
MIXER
Input 2
Input 4
Input 3
In 1
In 2
In 3
In 4 Out