Doepfer A-100(~ 40 MB) - Manual (Page 406)

A-142 Voltage Contr. Decay / Gate System A - 100 doepfer
4
4. In- / Outputs
! Trig. In
Socket ! is where the trigger signal is patched in.
" CV
Control voltages for the decay time are patched in
here.
H The actual decay time t
D
is determined by a
combination of the level of the CVs themselves,
and the positions of decay control 1 and the CV
attenuator 2.
§ Env. Out
Socket § is the output for the envelope that the A-
142 produces.
$ Gate Out • % Inv. Gate Out
The sockets for the gate output $ and inverted gate
output % respectively.
5. User Examples
Since the A-142 is really a simple envelope, with just
the one parameter to control, ideas for its use can
include any of the occasions on which you might use
the decay characteristics of an A-140 ADSR or A-141
VC-ADSR.
Random-Decay
fig. 2: Random-Decay
The patch in fig. 2 produces a random decay effect, so
that each key played has a percussive envelope of
VCO VCA
A-118
CV
Gate
A-148
VCD
CV
Random
Out
Trig. In
Trig. In
VCF