Doepfer A-100(~ 40 MB) - Manual (Page 555)

doepfer
System A - 100 Dual Trigger Modifier A-165
3
3. Indicators
1 LED
This LED is the status indicator for the inverted
trigger signal at output §.
2 LED
This LED is the status indicator for the trigger
pulses the A-165 generates, available at output $.
4. In / outputs
! In • " In
Sockets ! and " are the interconnected Inputs to the
A-165. This is where the trigger signal to be modified
is patched in.
P In practice, the original and inverted trigger
signal are often both needed at the same
time, so it’s possible to use these two inputs
as a mini-multiple - using one of them to
send the original trigger to another module.
§ Inv. Out
The inverted trigger signal is available at output §
(see Fig. 1).
$ +/- Out
Output $ carries the trigger signals generated by both
the leading and falling edges of the original trigger
signal (pulse length: approx. 50 ms). See Fig. 1.
Fig. 1: How the A-165’s outputs relate to the input.
w +/-
Out
Inv.
Out
In