KEYENCE LK-H2 - Manual (Page 16)

2-4
2
2 Preparations before Operating
Change the communication settings
When connecting via Ethernet, the communication settings for connecting to the network,
such as the IP address and subnet mask must be changed.
1
Change the communication settings at the controller.
Refer to the LK-G5000 series User's Manual for details.
To enable the new communication settings, restart the controller after changing the
settings.
2
Change the communication settings on the PC.
The configuration procedure differs depending on the version of Windows you are
using.
Refer to the instruction manual for the PC or LAN card you are using for details.
3
Launch LK-Navigator 2 (page 2-9).
4
From the "Communication settings" menu, select "PC communication settings".
The "PC Communication settings " dialog appears.
5
Select "Communicate with Ethernet". Then select the IP address of the controller.
Specify the controller IP address
Specify the actual IP address of the controller to connect to.
Auto search for controller
Click "Search connected controller" to specify the controller to connect to.
6
Click "OK".
NOTE