KEYENCE LK-H2 - Manual (Page 29)

3-5
3
3 Window Functions and Operation
Basic Settings
This section explains the basic settings for the LK-Navigator 2.
Head settings
This section explains the items and functions on the "Head Settings" tab.
Configure the head connected to the controller to match the operating environment.
Click the "Head Settings" tab in the settings pane.
General settings
(1) Target head selection
Specifies the head to configure.
To use three or more heads by using the head expansion unit, change the setting in the
"Controller environment setting" dialog (page 3-24).
(2) Measurement mode
Selects the object to measure.
(1)
(2)
(3)
(4) (5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Reference