KEYENCE LK-H2 - Manual (Page 48)

3-24
3
3 Window Functions and Operation
Environment Settings
This section explains how to configure the operating environment of the controller.
Click the "Controller Environment Setting" in the lower left of the main window to display the
"Environment setting" dialog.
(1) Controller RS-232C settings
Baud rate
Sets the communication speed of the controller.
Parity
Sets the parity check method.
Automatic transmission
Sets whether to automatically download the OUT to the RS-232C interface.
If you change the RS-232C settings in the "Controller Environment Setting" while the controller is
connected via the RS-232C interface, LK-Navigator 2 will download the settings and then
change the "PC Communication settings".
To use three or more heads/OUTs by using the head expansion unit, set the "No. of
used heads" and "No. of used OUT" before configuring the measurement settings.
Otherwise, changing these settings will initialize the other measurement settings.
(1)
(2)
(3)
NOTE